Products
Products
Hand-held Automatic Screw Locking Machine (Pull Type)
Hand-held automatic screw lock machine through the feeding system, distribution system, lock system three parts to complete the screw lock payment. All actions are completed by the device itself program control. This machine adopts adjustable track, which can realize the use of any screws within 20mm of universal M1-M4 length. The operation is very convenient. Can save a lot of hardware cost for enterprises.
Message
- Product Description
- Product parameters
- Related Products
-
Introduction of equipment advantages
One, can be universal all screws. It takes three simple steps to make it universal. (Other manufacturers can only match one type of screw to one type of this model, we break this tradition and take the lead in the reform. When replacing screws, only need to replace the small module and the batch head can be realized, and the whole replacement process does not need five minutes)
Two, the equipment comes with energy-saving mode. When the equipment is idle for a specific time, the equipment automatically starts the energy-saving mode. This mode can reduce the equipment consumption and reduce the wear between the screws and the guide rail, and ensure the durability of the equipment to the maximum extent. If in use can automatically wake up immediately use without waiting. (Other manufacturers do not have this function, this focus reflects: energy saving, screw and guide wear reduction, increase life, can automatically wake up immediately)
Three, the bin can be opened. When cleaning impurities and replacing screws, it is convenient to open the silo so that screws or impurities can be automatically discharged through the screw outlet. (Other manufacturers of this kind of equipment does not have this function, other manufacturers clean the silo either with magnets, or put the equipment upside down, if the stainless steel screws are more painful)
This equipment is smaller and lighter than the preceding model. Dimensions: 260*220*240(H)mm.
Five, can choose a variety of batch head to meet the needs of various products.
introduction
Hand-held automatic screw lock machine through the feeding system, distribution system, lock system three parts to complete the screw lock payment. All actions are completed by the device itself program control. All system components of the machine need to be customized according to the actual screw specifications, angles and dimensions of the position to be locked, and are non-standardized parts. The feeding mechanism assembly is used to sort the screws onto the vibration guide rail and feed them to the screw distribution system, through which the screws are distributed and sent to the lock nozzle by gas pipe pressure, and the screws are locked into the product by electric or pneumatic drivers.
advantage
1. The hand-held screw machine has strong universality and flexible operation, which is suitable for non-fixed point operation. With missing material sound and light reminder function.
2. The improved control system can effectively control screw feeding without repeated feeding and lack of material.
3. The feeding volume and noise of rotating mode are small, and the maintenance is more convenient. Can be placed on the workbench or under the floor, save space.
4. Fast feeding speed, complete can match the speed of the operator
5. Convenient, no hand grip screws, instant delivery to the batch nozzle. Free a hand to put products.
6. Lack of material intelligent alarm reminding function.
7. Fast, because it completely leaves out the hand movement, grab the screw, move, screw alignment driver and other actions, just align the screw hole can be locked screw.
8. Clean, because of the absence of hand to take the screw action, will not cause secondary pollution or rust due to hand sweat or stains on the screw.
9. The key parts are made of high quality alloy steel and subjected to special heat treatment.
Key words:- Automatic screw locking machine
-
工作电压
AC230V 50HZ
工作气压
2-3KGF/C㎡
工作效率
约50PCS/MIN
工作环境温度
-20- 40℃
功率
< 30W
噪音
低于55分贝
输送距离
1-4米
螺丝兜容量
M2X6标准螺丝6000个
外形尺寸
260*220*240MM
机身重量
8KG
适用螺丝1.M1.0-M6
2. 适用任何材质螺丝
3. 一字、十字、Y字、三角、梅花、内六角、H头等适合螺丝批
电批或风批。可配客户现有的电批或风批。
Message
Shenzhen Huacheng Automation Equipment Co., Ltd
Add：Phase II of Pujing Semiconductor Industrial Park, Songgang Street, Bao'an District, Shenzhen City
Tel：0755-2729 7880
Fax：0755-2729 7881
E-mail：SZhcauto@163.com
Follow Us
© COPYRIGHT 2023 Shenzhen Huacheng Automation Equipment Co., Ltd 粤ICP备13080537号 Powered by:300.cn SEO
© COPYRIGHT 2023 Shenzhen Huacheng Automation Equipment Co., Ltd
